![]() ![]() If the expansion bolt is used, align the bracket mounting hole with the bolt and tighten the nut with an open end wrench. Take out the light components, align the mounting hole of the light bracket with the punched hole, fix the bracket by inserting the self-tapping screw with a power screwdriver. Select appropriate drill bit, punch a hole with the impact drill, and knock the expansion screw into the hole first. Make a punch mark on the surface to be installed. To begin with, please follow the 4 simple steps above. Tools: open end wrench, electric screwdriver, impact drill, and hammer. If you want to make the flood light more stable, or keep it from being taken away, you can fix the lights to the wall or the ground. ![]() Advanced Installation Guide of LED Flood Light Turn on the LED flood lightĪfter the installation, please turn the switch on and test whether the light is on. Adjust the angleĪfter the light wires are connected, adjust the projection angle of the light using the open end wrench. Connect the wiresĪfter fixing the light components, connect the wires according to the mark of the fire wire, the zero wire, and the ground wire. To start with, please turn off the main power for safety reasons. Simple Guide to Install LED Flood Lightĭo not need to fix to wall, ground or others. ![]() This page introduces how to install LED flood lights. LED flood lights are widely used for gardens, backyards, garages, parking lot lighting, and more. ![]()
0 Comments
Leave a Reply. |